Shelving Wrap

DIY Cabinet Wrapping Made EASY With Architectural Film

How To Vinyl Wrap Your Cabinets & TV Stand

In this video, Randy Miller from RM Wraps walks you through the step-by-step process of wrapping a custom-built cabinet using Di-Noc Architectural Film. Learn expert techniques, including surface preparation, precise vinyl cutting, and seamless application to achieve a professional, durable finish.

Key Techniques and Steps

1. Prepping the Surface

Uses MDF boards for a strong and long-lasting structure.
Filling holes & sanding:
- First, applies spackle to fill gaps.
- Uses putty (Bondo) for additional smoothing.
- Sands with 220-grit sandpaper for a smooth finish.
Primer 94 application: Applied only to the edges where the vinyl needs extra adhesion.

2. Cutting and Measuring Vinyl

Adds extra 1-inch bleed on all sides to ensure full coverage.
Uses a Bodyguard knife to separate the vinyl from the backing while leaving a "tacking-on strip."
Folds the vinyl to create an easier application process.

3. Installing the Vinyl

Applies the vinyl by first securing the center tacking-on strip, ensuring level placement.
Uses architectural film squeegee to press the vinyl into corners.
Cuts 45-degree angles at corners to help with wrapping.
Uses a 1/8-inch gap method to tuck vinyl into edges for a seamless look.

4. Handling Corners & Edges

Uses heat gun for post-heating, which activates adhesive and relaxes vinyl.
Employs squeegee and sanding techniques instead of cutting to avoid damaging surfaces.
Double-cuts where necessary to achieve smooth seams.