Pro Crystal Squeegee

Here’s the playlist of the RM wraps Architectural film Squeegee Videos.

Architectural film squeegee is made out of wood or acrylic.

The Felt side is 4.5” long. Left side is 3” high and right side is 1.5 “ high. 

1. The arrows lead you the right direction to go. The squeegee needs to be at 30 degree angle to force the air down and out, by creating said arrows we can facilitate customer use. 

2. The 3 lines are made to cut at the corner of the subject by using the 90 degree gap.

3. The thickness of the Architectural Finish Squeegee is 1/8 in or 0.125 in, with the sole purpose of being used as a spacer. 

4. If the 1/8 in does not suffice, you can use the 4 slots on the top right corner which are meant to be used as spacers, as well. 

5. For a round corner cut, you can use the top left corner of your squeegee. 

6. The top left half inch over is where you can put your blade and cut the vinyl. It will hold the blade in place and Architectural Finish squeegee will force the vinyl down.