Architectural Films "Pro" Squeegee
These squeegees were designed to cut down on the number of different tools needed to complete a professional architectural film installation. Several functions are built-in, minimizing time spent reaching for other tools and potential for misplacing tools in between use. Using the Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
These squeegees were designed to cut down on the number of different tools needed to complete a professional architectural film installation. Several functions are built-in, minimizing time spent reaching for other tools and potential for misplacing tools in between use. Using the Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
These squeegees were designed to cut down on the number of different tools needed to complete a professional architectural film installation. Several functions are built-in, minimizing time spent reaching for other tools and potential for misplacing tools in between use. Using the Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
Features of our “Pro” Squeegees:
Ergonomic shape & rigid design allow for higher and more uniform pressure across the film during application.
Guide arrows meant to be gentle reminders of proper squeegee angle to minimize air bubbles.
Wider surface area than most squeegees allows sticking down of more material per pass, speeding up install.
90° corner cut guides for perfect flush or overlapping corners on cabinet doors, table tops, etc.
Spaced blade guides for flush cutting at recessed corners and/or creating straight, clean overlaps between perpendicular surfaces.
Engraved line for straight alignment of replacement felt.
Lanyard hole for use with wrist strap for drop avoidance.
Available in many acrylic colors and plywood finishes.
About Our Pro Squeegees
Acrylic versions hold up better at the edges and are better for tight corners, but the wood grain versions are overall more durable. Acrylic versions are more brittle and can snap at the 90° corner cut if handled roughly/held incorrectly while using high levels of pressure.
Dimensions: 5.25” wide by 3.125” tall (overall). Contact surface (felt) is 4.5”
See These Squeegees In Action
This is a large playlist of several projects Randy has installed over the years, how-to tutorials & quick tips, all featuring these tools. To see the full playlist, go to the top right side, click on the 3 lines.