Worker A Architectural film Squeegee
These squeegees were designed first and foremost for ergonomics and robustness. Their wider shape and rigid form allow for quicker, more uniform application of architectural films. Using the Red Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
These squeegees were designed first and foremost for ergonomics and robustness. Their wider shape and rigid form allow for quicker, more uniform application of architectural films. Using the Red Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
These squeegees were designed first and foremost for ergonomics and robustness. Their wider shape and rigid form allow for quicker, more uniform application of architectural films. Using the Red Micro Fiber Felt.
Designed & Made in Meridian, Idaho.
Features of our “Worker A” Squeegees:
Ergonomic shape & rigid design allow for higher and more uniform pressure across the film during application.
Wider surface area than most squeegees allows sticking down of more material per pass, speeding up install.
Corner notch acting as a blade guide/stabilizer for evenly cutting gaps.
Guide arrows meant to be gentle reminders of proper squeegee angle to minimize air bubbles.
1/8” squeegee thickness, allowing the squeegee to double as a spacer/blade guide for flush cutting at recessed corners and/or creating straight, clean overlaps between perpendicular surfaces.
1” and 1/2” tick marks (ruler) engraved into the squeegee for quick measurements
Engraved line for straight alignment of replacement felt.
Lanyard hole for use with wrist strap for drop avoidance.
Available in many acrylic colors and plywood finishes.
Dimensions: 5.25” wide by 3.125” tall (overall). Contact surface (felt) is 4.5”
About the “Work A” Squeegees
